Spa Cover Care – Clean, Maintain & Protect Your Cover

Posted by

Spa covers are an investment in your hot tub. Like any investment, you should protect it. This guide presents maintenance tips that can save you money and maybe even some grief in the end.

About Spa Cover Jackets

Most inexpensive hot tub covers use vinyl for the jacket or skin. Marine-grade, heavy-duty vinyl used to be the best material for this job.

WeatherShield fabric is light, durable, and extremely UV resistant.

Now that technology has caught up with hot tub covers, it’s time to say goodbye to vinyl and hello to durable WeatherShield Outdoor Fabric. WeatherShield is our extremely durable fabric that is 3 times stronger and weighs 25% less than marine-grade vinyl.

Sounds good right? In addition, nothing on the market is more resistant to harsh UV rays than WeatherShield.

Protecting Your Investment From Damage

303 Protectant cleans as well as prevents fading & cracking. We advise using only 303 Aerospace Protectant on hot tub covers.

Don’t worry if you have a new high-tech fabric spa cover, the same UV-blocking technology is also available to protect outdoor fabric covers and furniture: 303 High Tech Fabric Guard.

303 keeps UV rays from damaging vinyl and fabric covers.

We’ve tested them all, and these are simply the best products of their kind. Earth-friendly, non-toxic formulas add years to cover life. With regular use, 303 blocks up to 100% of harmful UV to prevent sun damage.

When applied to the underside of your cover, they also help prevent mildew. 303 Protectant is very economical, and you’ll find many other uses for it around the home, RV, boat, and car.

Using the wrong vinyl treatment product is worse than using nothing at all! In fact, a well-known automotive vinyl treatment contains silicone oil, which is death to vinyl. Avoid products that contain any type of oil or petroleum distillates, have a greasy feeling, or leave a waxy coating.

If a vinyl protectant product label says “flammable” or contains petroleum distillates, keep it away from your spa cover! These products look good when first applied, but actually accelerate spa cover deterioration and offer little or no UV protection.

Periodic Hot Tub Cover Cleaning & Maintenance

Cleaning your spa cover is an important part of routine spa maintenance. Dirt is abrasive to the outer skin, and causes wear to the fold, seams, and stitching. Mildew, which grows on damp, dirty vinyl, begins to root in the fabric, accelerating failure.

A handy kit like this makes cover care a cinch!

Routine cleaning for fabric and vinyl covers, before application of 303 protectants:

  • Rinse with cool water using a garden hose
  • Spray with a gentle, non-foaming cleaner such as our Earth-friendly ecoTUB Spa Clean and wipe clean. Never use laundry detergent, abrasives, bleach, alcohols, dish soaps or harsh cleaners. These products can actually remove some of the topcoat and cause premature vinyl failure.
  • TIP: Remove tree sap by rubbing with a little vegetable oil or margarine.
  • For stubborn dirt, use a non-abrasive sponge such as our Spange.
  • Rinse again thoroughly with water and let dry.
  • Repeat monthly, or as needed.

Applying 303 Protectant:

  • After cleaning cover, spray a light coating of 303 Protectant on top and cover skirt.
  • Spread evenly with a damp terry cloth or use the yellow side of our Spange.
  • Repeat procedure on underside of your cover. This will help prevent the formation of mildew.
  • Repeat monthly in summer… every 3 to 4 months the rest of the year. There’s never a buildup.

Dealing with Mildew Inside the Outer Jacket (Indicated if odor is a problem)

mold and mildew in cover vapor barrier
Ewww, mildew.

Unzip the jacket and carefully remove the foam cores.

  • Clean the inside of the jacket with ecoTUB Spa Clean and a soft brush.
  • Clean the core’s plastic vapor barrier.
  • Spray off surfaces with garden hose.
  • Towel-dry all surfaces, and allow for additional air-dry time of the jacket.
  • Sunlight exposure for an hour or two helps rid residual mildew from inside the jacket.
  • Keep foam core in the shade while drying.
  • Carefully reassemble when dry.
    Note: If foam core is rotten and waterlogged, cover requires replacement.

Care Tips for Prolonging Spa Cover Longevity

Warranty

Treat your cover as you would a fine automobile. A new car comes with a warranty covering mechanical defects. Its warranty does not cover dents, rock-dinged windshields, or tire wear.

Premature engine failure in a car not properly maintained also is not covered. Similarly, a spa cover warranty covers material defects, but not damage caused by abuse, accidents, neglect, or normal wear and tear. We’ve put together the information you need for proper maintenance to get the most life out of your spa cover.

Protecting the Foam Core

Spa covers have a core of polystyrene, which can be broken if abused. Never allow children to jump or play on a cover, which can cause breakage of the core.

Grit from shoes or bare feet can also mar the vinyl covering, causing premature failure. Avoid placing sharp objects on the cover, which can puncture the core liner, permitting water absorption by the foam core. Animal claw scratches or chewing can have the same result, so try to keep pets away.

Avoid placing glass or other objects on the cover, which can create excessive heat from the magnified effects of sunlight. This heat can actually cause the foam core to melt and is not covered by the warranty.

Cover foam melted by inflatable toy left on top.
Something got set on this cover, causing it to melt in the sun.

Sheathing the insulating core in clear plastic prevents water from being absorbed into the insulation. Condensation and rainwater seepage between the outer vinyl skin and the clear liner of the foam core is normal. All spa covers should have weep holes in their undersides to allow this water to drain out.

Dealing with Water Intrusion

Although a few water droplets inside the clear plastic liner are not a major concern, larger water accumulation requires attention. The cause is normally a puncture or a break in the vapor barrier, which is easy to fix yourself. (A heavy, saturated foam core is a different matter, indicative of an old waterlogged spa cover that needs replacement).

If your cover core liner has water in it, open the zipper and carefully remove the form core for inspection. Look for punctures or openings around the perimeter seal. Even a small hole can let in a lot of water over time.

Patching Holes in Clear Core Liner

After locating the hole, drain as much of the accumulated water out of the clear plastic liner as possible. This will prevent it from eventually absorbing into the foam core.

What if you can’t evacuate the water through the entry hole? Try cutting a small slit in the plastic liner near one of the corners. Set the core on edge so that the water flows down and out of the slit.

Don’t expect to get out every last drop– if you get most of it out, you’ll be in good shape.

Liner holes are simple to fix with Spa Bond Leak Seal Patch Kit. This inexpensive product is the only permanent sealing solution around water.

Make sure the plastic is dry around your repair so that it will adhere. Fixing it yourself is easy and eliminates the considerable expense of shipping off the large core for repairs.

Repairing Minor Spa Cover Rips and Tears

Repair small holes and tears in a spa cover with Spa Bond Leak Seal Patch Kit. This special clear elastomeric material permanently adheres to vinyl while making a very neat mend.

patch application
Patching a hole in the vinyl is easy with SpaBond.

Just make sure the surface is clean and dry before application. Again, fixing it by yourself is easy and economical.

Tie Down Straps & Broken Latches

Tie-down straps are there for one purpose: to secure the cover to the spa. To avoid ripping the straps, never use them to carry or remove the cover. Another cause of ripped straps is failure to unlatch the locks before lifting the cover off of the spa. No warranty covers this type of damage.

Replace broken cover locks/latches. It’s easy with our Sure-Lock replacement set of four with mounting screws.

Cover strap lock key
Secure that hot tub cover.

Avoiding Fabric, Vinyl, Seam, & Stitching Damage

  • A high quality Spa Cover Lifter can reduce stress on seams.
  • Use handles only for gentle opening or closing of the spa cover.
  • Handles are not for carrying or removal of the cover from the hot tub.
  • Do not lift cover by the skirt. This stresses and can rip the bottom seams.
  • Never drag a cover across the ground, especially concrete surfaces.
  • Never place glass objects on a spa cover. The glass can magnify sunlight and melt the vinyl.
  • Maintain proper water balance and pH.
  • Excessive bromine, chlorine, or shock can deteriorate vinyl.
  • Use a floating Spa Blanket to protect cover from excess evaporative chemicals & moisture.
  • Use of Alternative Sanitizer systems can prolong spa cover life expectancy.
  • Carefully secure all latches when hot tub is not in use, to prevent wind damage.

Snow Accumulation

A single cubic foot of freshly fallen dry snow weighs about 30 pounds! Doing the math, an 8’x8′ cover with just 3 inches of accumulation is supporting nearly 500 extra pounds. That weight goes up even more with wet snow or ice.

Once you’ve swept off the spa, I do not recommend going onto the roof to take a photo.

Hot tub cover manufacturer’s warranties do not cover snow or other weight-related damage. If it snows where you live, help prevent breakage of the cover’s foam core by removing excess ice-snow accumulation.

Water Puddles

Sometimes a hot tub cover that has been weight-stressed will develop water puddles due to sagging. Some cheap or older covers lack a tapered core for proper water runoff, exacerbating the problem.

Warped green cover
This is going to be more of a lake than a puddle.

If you get a small puddle on your cover, remove the foam core from the jacket, and flip it over. Flipping sometimes corrects this issue (at least temporarily) if not too severe.

Recap?

If your old cover is waterlogged, it’s time for a replacement. Be sure to buy a well-crafted one. Think of a new cover as an investment, not an expense.

DuraTherm covers are not the cheapest, but you get what you pay for: a high-quality, long-lasting, energy-efficient, custom-made cover. See our Cover Replacement Guide for more information.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s